Outline Drawing; Installation Environment - Pentair Evolio 255 Serie Handbuch

3.2.

Outline drawing

Evolio 255, 10 and 15 models
Evolio 255, 20 and 30 models
3.3. Softener's available options
3.3.1. Chlorine generator and check salt led
The Logix 740-760 controller has the capability to produce a low level of chlorine to chlorinate the resin bed during
regeneration. A check salt light will indicate when the user needs to add salt to the brine tank. Potassium chloride or sodium
chloride may be used.
3.3.2. Safety brine valve
To avoid overflow and to get a better softener operation, a safety brine valve can be installed.
4 . Installation
4.1.

Installation environment

4.1.1. General
• Use only brine salts designed for water softening. Do not use ice melt salt, block, or rock salts;
• follow State and local codes for water testing. Do not use water that is micro-biologically unsafe or of unknown quality;
• when filling media tank, first place the valve in backwash position, then do not open water valve completely. Fill tank slowly
to prevent media from exiting the tank;
• when installing the water connection (bypass or manifold) connect to the plumbing system first. Allow heated parts to cool
and cemented parts to set before installing any plastic parts. Do not get primer or solvent on o-rings, nuts, or the valve.
Ref. MKT-UG-037 / C - 14.11.2019
User Guide Evolio
Evolio 255, all models
9 / 116