How To Use; Safety Precautions; Warranty Information - Peach Smart Binder 21 Bedienungsanleitung

1
Description
A Punching and binding lever
B Slider for paper format when punching
C Punching slot
D Binding mechanism for comb opening and closing
E Measuring gauge for determining comb size
F Waste container
G Slot for ring binder hole punching.

How to use

1. Setting up the machine
• Place the machine on a stable surface.
2. Punching and binding
• Set the paper format to be used with the slider B.
3. Punching
Test the punching result with a piece of scrap paper before you punch the original document.
• Tap the paper stack on a flat surface and place it in the punching slot C with the pages aligned
to the left side.
• Press the punching lever A down to carry out the punching procedure.
4. Binding
• Determining the binding comb size with measuring gauge E.
• Place the plastic binding comb in the binding mechanism D with the side to be opened uppermost.
• Press the binding lever A far enough backwards so that the binding comb is opened wide enough for
the paper to be comfortably laid over it.
• Place the punched paper stack onto the opened binding comb. Start with the front cover. To close the
binding comb, push the binding lever A back to its starting position.
• Remove the bound document.
5. Insert the paper/film here to provide it with 4 ring binder holes.
6. Emptying the waste container
• The waste container F is situated on the underside of the machine. Release the cover of the waste
container over a waste paper bin and empty it. Close the waste container again.

Safety precautions

• This machine has been developed for punching paper and plastic sheets and for binding these
materials with plastic binding combs. It must be used solely for this purpose and in accordance
with these operating instructions.
• Always make a test with scrap paper before punching the original document.
• Empty the waste container regularly.
• Do not attempt to exceed the maximum punching quantity of 12 sheets A4 80g/m .

Warranty Information

2-YEARS LIMITED WARRANTY IN EUROPE
PEACH OFFICE PRODUCTS equipment is warranted in Europe for a period of two years from the date of the purchase. Defects or device failures which have
been caused by incorrect or wrongful use, regardless whether unintentional or intentional, or non-compliance with the manufacturer's instructions during
the operation or maintenance of the device are excluded from the warranty. In the event of returning the equipment to Peach, suitable packaging must be
used. Peach will not accept liability for the loss of, or damages during delivery when unsuitable packaging has been used.
For service of the unit under warranty, please contact:
3T Supplies AG, Peach Division
Chaltenbodenstr. 6
CH-8834 Schindellegi
Tel.: 00800 55 77 88 11
Fax: 00800 55 77 88 12
E-Mail: support@peach.info
2