Rollei Mark II Anleitung Seite 28

Functions
28
1. Power value:
M: In the manual mode the
power can be set from 1 .0 ~ 9 .0 .
The minimum power output is 1 .0
and the maximum one is 9 .0 . Briefly
press the control dial until the flash
output is highlighted . To change 0 .1 f each, turn the control dial . For large
adjustments, press and hold the control dial for about 2 seconds . Turn the
control dial to adjust the flash output in 1 f increments .
TTL: In the TTL automatic mode the power can be adjusted from -3 .0 ~ +
3 .0 . The minium exposure compensation value is -3 .0 while the maximum
value is +3 .0 . The values can be changed in increments of 0 .3 .
ENGLISH
3
2
6
1
5
4