Rollei Mark II Anleitung Seite 27

Options
Back light
Sleep(min)
ID number
Reset
Flash
Installation
1. Charge the battery: To charge the radio trigger, connect a USB adapter
(not included) to the charging connector . Use the supplied USB cable .
2. Attaching to the camera: Before connecting the trigger to your camera
make sure that both devices are turned off . Then slide the trigger into the
hot shoe of your camera .
3. Power ON / OFF: To turn the trigger on please press Power button for
about 2 seconds . To turn the device off press the Power button again for
about 2 seconds .
Note:
• Press function keys 1 and 2 for approx . two
MID
seconds to activate the key lock .
10
• Press function keys 2 and 3 for approx . two
99
seconds to enter the function menu .
OK
27