Connecting The Drive To Your Computer - Toshiba STOR.E ALU 2S Bedienungsanleitung

Connecting the drive to your
computer
1. Air Vent
2. Power Switch
3. USB 3.0 port
4. DC IN 12V Jack
1. Turn off your computer.
2. Plug the AC adaptor's DC output plug into the DC IN 12V jack of the
drive and the power cord into a live wall outlet.
3. Plug the USB 3.0 Standard-A connector into a USB port of your host
system or an active USB HUB.
You may need USB 3.0 Express Card Host Controller for your computer if
NOTE
the computer doesn't have USB 3.0 port. You also can connect the device
to USB 2.0 port of your computer, However the transfer rate will be
downgraded to that of USB 2.0.
4. Now, plug the USB 3.0 Type B connector into the corresponding port of
the drive itself.
5. Boot up your computer.
6. Switch on the drive by pushing the Power Switch.
■
■
■
User's Manual
1
2
5
4
the Power/Data indicator light will illuminate
the drive will power up
the drive should mount and a new drive icon should appear in "My
Computer"
3
6
7
8
5. DC output plug
6. USB 3.0 Type B connector
7. USB 3.0 Standard-A connector
8. USB 3.0 host
backward compatible to USB 2.0
STOR.E ALU 2S 3.5"
EN-6