System Requirements; Installing The Drive; Installing And Removing The Replaceable Plugs - Toshiba STOR.E ALU 2S Bedienungsanleitung

If the drive behaves not as expected or you have doubts about the electrical
safety, please contact the TOSHIBA hotline or an authorised reseller
immediately!

System Requirements

Windows
■
CPU with 750 MHz or faster
■
10 MB system hard disk space
■
256 MB system memory
■
One free port of USB 3.0 or USB 2.0
■
NOTE
USB 3.0 is backward compatible with USB 2.0.

Installing the drive

Some information about bus-powered operation and the supplied USB cable:
Passive USB hubs or USB connectors like keyboards, mice or similar
■
products cannot be used or connected to the drive.
Make sure that the connectors will be inserted correctly.
■
Never use pressure for connecting the cables. Check the polarity before
■
connecting!
Installing and Removing the
Replaceable Plugs
To install and remove the AC adapter replaceable plugs, see the
illustrations below.
User's Manual
® XP / VISTA ® /Windows ® 7
STOR.E ALU 2S 3.5"
EN-5