Safety Instructions - Toshiba STOR.E ALU 2S Bedienungsanleitung

Safety Instructions

In order to avoid malfunction or damage of the drive, please carefully follow
the precautions listed below.
WARNING
Make sure that you backup all your data on the drive, as Toshiba is not
■
responsible for data corruption or data loss. Toshiba will not cover any
data recovery cost.
Do not
■
■
■
■
■
■
■
■
■
■
■
■
■
And
■
■
■
■
Immediately disconnect the drive from the power outlet and the host PC if
■
■
■
■
■
The power switch does not disconnect the AC adaptor from the electricity
NOTE
network, but just switches off the drive itself.
We therefore recommend that you disconnect the AC/DC adaptor from the
power outlet if the drive may not be used for a while in order to save
energy.
User's Manual
open the enclosure or drive
disassemble the drive or parts of it
place liquids near or on the drive, as it may damage the drive, cause
personal injury or may result in an electrical shock or fire
bump, drop or jar the drive
move the drive while operating, as data damage may happen
use other connectors than USB bus powered types
use other AC/DC adaptors than the one bundled with your drive,as
otherwise your drive may be damaged
disconnect cables while operating. Please dismount the drive first!
expose the drive to temperatures outside the range of 5°C – 35°C
while operating, and temperatures of -20°C – 60°C while switched off
expose the drive to wet or damp conditions
cover the drive during operation, as it may become overheated
place the drive close to hot appliances
make sure that the connectors will be inserted correctly
never use pressure for connecting the cables
check the polarity before connecting
smoke or an unusual smell is coming from the drive enclosure
water has entered the drive enclosure or if it becomes wet
an object has entered the drive enclosure
the cable has been damaged (in such case replace the cable with a
new one)
STOR.E ALU 2S 3.5"
EN-4