Operating The Monitor - iiyama AX3819UT Bedienungsanleitung

OPERATING THE MONITOR

To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 19. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 13 for SCREEN ADJUSTMENTS.
(
Press the Menu Button to start the On Screen Display feature. There are
two Menu pages which can be switched by using the +/– Buttons.
Adjustment icon
Current horizontal frequency,
vertical refresh rate
and resolution
B
Select the Menu page which contains the adjustment icon relating to the
adjustment you want to make. Press the Menu Button again. Then, use the
+/– Buttons to highlight the desired adjustment icon. Press the Menu Button
again.
C
Use the +/– Buttons to make the appropriate adjustment or setting.
For example, to correct for vertical position, select Menu page number 1 and then press the Menu
Button. Then, select
An adjustment bar appears after you press the Menu Button. Use the +/– Buttons to change the
vertical position settings. The vertical position of the overall display should be changing accordingly
while you are doing this.
The bar shows
the progress of the
adjustment being made.
NOTE
n
The On Screen Display disappears several seconds after you stop pressing the buttons while
performing an adjustment. Any changes are automatically saved in the memory when the On
Screen Display disappears. Turning off the power should be avoided while using the Menu.
n
Adjustments for Clock, Phase and Position are saved for each signal timing. Except for these
adjustments, all other adjustments have only one setting which applies to all signal timings.
H : 4 6 . 8 K V : 7 5 . 0
8 0 0
(V-Position) by using the +/– Buttons.
V - P o s i t i o n
V - P o s i t i o n
–
M e n u : 1
× 6 0 0
M e n u : 1
+
OPERATING THE MONITOR
Page no.
9