Operating The Monitor; Screen Control - iiyama Vision Master Pro511 Bedienungsanleitung

OPERATING THE MONITOR

The iiyama Vision Master has been preset at the factory with the signal timings listed on page 17
in PRESET MODES to create the best picture. If an incorrect picture appears during the operation,
adjust the image by following the procedure below to get the desired picture.
After selecting an item in the Main Menu, the adjustments and settings
are made in the Sub-Menu.
(
Main Menu appears on the screen when you press the Menu
Button.
B
For example, to adjust the horizontal screen size, select
(Screen Control) on the Main Menu by using the +/– Buttons. The
Sub-Menu appears when you press the Menu Button.
Menu
Adjustment icon

Screen Control

Adjustment menu
presently selected
n
NOTE
(Landing) is only available on MA201D.
C
Select (H-Size) on the Sub-Menu by using the +/– Buttons. An
adjustment scale will turn white when you press the Menu Button.
Use the +/– Buttons to adjust the horizontal screen size. See
ADJUSTMENT MENU CONTENTS on next pages for further information.
Screen Control
Adjustment icon
H-Size
Adjustment menu
presently selected
-
The line shows the
progress of the
adjustment being
made.
NOTE
n
The On Screen Display disappears in optional setting seconds after you stop pressing the
buttons while performing an adjustment. (See page 10 for OSD Off Timer.)
n
Adjustments for Size, Position, Pin-Cushion and Trapezoid are saved for each signal timing.
Except for these adjustments, all other adjustments such as Color, Parallelogram, Convergence,
Moire and Landing have only one setting which applies to all signal timings.
| | | | | | | | | | | | | | | | | | | | | | | | |
RB
FUNC
· · · · · · · · · · · · · · · · · · · · · · · · ·
OPERATING THE MONITOR
+
50
7