Important Information - NEC MultiSync BT421 Installationsanweisung

Important Information

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED
PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER
OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH
VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER
CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE
THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD
FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit
may have sufficient magnitude to cause electric shock. Therefore,
it is dangerous to make any kind of contact with any part inside
this unit.
This symbol alerts the user that important literature concerning
the operation and maintenance of this unit has been included.
Therefore, it should be read carefully in order to avoid any
problems.
CAUTION: Please use the power cord provided with this display in
accordance with the table below. If a power cord is not
supplied with this equipment, please contact NEC. For all
other cases, please use the power cord with the plug style
that matches the power socket where the monitor is located.
The compatible power cord corresponds to the AC voltage
of the power outlet and has been approved by, and complies
with, the safety standards in the country of purchase.
This equipment is designed to be used in the condition of
the power cord connected to earth. If the power cord is not
connected to the earth, it may cause electric shock. Please
make sure the power cord is earthed properly.
WARNING
CAUTION
English-2