Fakir HT 2000 Bedienungsanleitung Seite 15

GB
Decrease
Temperature
Before inserting the plug into an electrical outlet, make sure that the electrical supply in
your area matches that on the rating label on the unit.
When plugged in, turn on the Main power switch (1) at the rear of the upper of the
heater , then you can use as following:
1) Used to turn on/off the device in standby mode LED-display Displays the value of
the set temperature and/or time of the timer
2) Time: Used to select the mode of timer set
3) Used to set the desired temperature value
4） Timer: The timer function allow you to see the length of operation for up to 9 hours.
5) Mode: Used to select the heating power or ventilation mode without heating
6) OSC:Used to set the oscillation function
WARNING!
The heater will remain hot for some time after it is
turned off. Please handle with care.
HT 2000
1- On/Off Switch
Temperature
on-off display
stand by
Timer
icon
Power
Display
Increased Temperature
2- Kontrol Panel
3- Metal mesh for Air-outlet
Timer
Fahrenheit
Low Power
High Power
Fan Only
Oscillation
16
4- Base board