DenMat Precision Gebrauchsanweisung Seite 10

Special Notes & Precautions
• Cartridge material must be used with a 1:1/1:2 dispensing cartridge gun
system. FatPak material can be used in a 5:1 compatible automix unit with
dynamic mixer tips.
• Solutions applied prior to impression taking (such as retraction solution) may
impede the setting reaction of the impression. Therefore, material must be
cleaned off thoroughly with water and dried.
• Do not leave remains of the impression material in the sulcus.
• Avoid splattering this material onto clothing as it cannot be removed by
dry cleaning.
• The possibility of allergic reactions to the product in sensitive persons
cannot be fully excluded. Possible reactions may include temporary
numbness or tingling in the soft tissue.
• When taking an impression adjacent to an existing fixed bridge, make sure all
undercuts are sufficiently blocked out.
• All intraoral areas touched by latex gloves should be rinsed and dried prior to
impression taking.
The information provided by DenMat is based on comprehensive
research and experience in application technology. Results are furnished
to the best of our knowledge, subject to technical changes within the
framework of product development. However, users must comply with
and consider all recommendations and information in connection with
any use.
Compatibility
Precision is an addition-reaction type silicone impression
material and should not be combined with standard or
condensation type silicon materials or polyether materials.
For professional use only. U.S.A. Federal Law restricts this device to sale
by or on the order of a dentist.
9