Use; Key To Labelling - TEUFELBERGER NODUS Herstellerinformation Und Gebrauchsanleitung

The product accompanied by this set of instructions
is type-examined, CE-marked to state conformity
with the European regulation (EU) 2016/425 on
Personal Protective Equipment (PPE) and meets the
European standard(s) given on the product label.
The product does however not comply with any
other standards unless explicitly stated.

1. USE

Accessory cords are only to be used as auxiliary
ropes for mountaineering and climbing. They
are only designed to take force and not energy.
Other system components must meet the standards
applicable to mountaineering equipment.
NOTE
The rope should be the personal property of the
user. The information supplied (user instructions)
should be kept together with the equipment. The
product should only be used by persons who have the
appropriate training and/or are otherwise competent
to use it, or the user must be directly supervised
by such a person.
Ensure that the recommendations for the use with
other components are complied with: Further PPE
components must meet the harmonized standards
under the regime of regulation (EU) 2016/425. For
instance ropes must meet EN 892, and karabiners,
EN 12275.
You put yourself at risk by combining equipment
elements such that the safe operation of one com-
ponent or the equipment as a whole is impaired.
Check the rope visually before using it to en-
sure that it is in a condition suitable for use
and that it works correctly. In the event of the
slightest doubt, the product should be with-
drawn from use or examined by a specialist.
WARNING
The use of our products can be dangerous. Our products may only be used for their intended purpose. They must particularly not be used for lifting
as specified in EU directive 2006/42/EC. The customer is responsible that the user has been trained in the safe use of the product and in accom-
panying safety precautions.Be aware of the fact that the product can cause damage if wrongly used, stored, cleaned or overloaded.Check national
safety regulations, industry recommendations and standards for local requirements. TEUFELBERGER
trademarks of the TEUFELBERGER Group.
USE / KEY TO LABELLING / SERVICE LIFE
mm
Nodus 4mm 4.0
Nodus 6mm 6.0
Reepschnur
8.0
8mm
TPT Reep
8.0
Cord 8mm
TEC Reep
8.0
Cord 8mm
Resc Tec
8.0
8mm
The technical details only apply to the product when
new at the time of manufacture!

2. KEY TO LABELLING

– Product name: NODUS, REEPSCHNUR
TPT REEP CORD, TEC REEP CORD, RESC TEC
– EN 564:2014: Valid standard for accessory cord
– CE 0408: The CE mark certifies compliance
with the fundamental requirements of regulation
(EU) 2016/425. The number identifies the testing
institute (e.g., 0408 for TÜV Austria Services GmbH,
Deutschstrasse 10, A-1230 Vienna, Austria).
– Item number of the product
YY/MM: year/month of manufacture
MBL: Breaking load in [kN] at the time of manufacture
Diameter in [mm]
L Length in [m]
Refer to the user instructions
Manufacturer
Edition: 11/2019, Art. no.: 6800532
and 拖飞宝
®
kN g/m
PES//
4.5 12.4
PES
PES//
9.4 26.5
PES
PES//
14.4 50.0
PES
PES//
14.4 52.0
PES
HMPE/
30.0 38.0 Aramid/PP//
HMPE
PES/
29.0 41.5 Aramid//
HMPE/ PP
are internationally registered
®
3