Sensear smartPlug Bedienungsanleitung Seite 8

7. CONNECTING TWO WAY RADIO
smartPlugheadset can be connected to most Two Way
Radios through interface cables (sold separately).
1. Connect the Two Way Radio Cable into the Two way
Radio Connector located on the bottom of the Main
Unit.
2. Turn the Two Way Radio on. A tone will be heard
through the headset indicating it has detected the
Two Way Radio.
3. Adjust the volume of the Two Way Radio
communication by the normal controls of your Two
Way Radio until a comfortable level is reached.
4. To transmit, press and hold the Inline 1 Button or
the button programmed by your dealer.
Note: See 'Using Bluetooth' for more information on
connecting Two-Way Radios by Bluetooth.
Two Way Radio Connector
Two Way Radio Cable
6
Inline PTT
Inline 1 Button