Sensear smartPlug Bedienungsanleitung Seite 5

3. FITTING THE EARBUDS
It is critical the earbuds are correctly fitted to ensure the correct level of hearing protection and communication abilities. The Earbuds
incorporate an in-ear pickup, if the Earbuds are not fitted correctly, the speech quality may be lower than expected.
2. Roll Foam Tip to a
1. Place Disposable Foam
compressed, crease free
Tip between thumb and
cylinder
forefinger.
6. Using your opposite hand, pull
your ear upward and outward.
Insert the Ear Bud deeply into the
ear -as you would normally do with
a Foam Ear Plug.
3. Push the Foam Tip all the
way onto the Ear Bud spout.
7. Hold the Ear Bud in place for
30 seconds while the Foam Tip
expands.
4. Roll the Foam Tip again
between the thumb and
forefinger.
8. Check to ensure the Ear Buds
are correctly inserted.
3
5. Ensure the Foam Tip
remains a compressed,
crease free cylinder on the
Ear Bud.
9. A poor fit will be visible by the
Earbuds being far away from the
ear. No foam tip should be visible.
Repeat the process until a good
fit is achieved.