38 electrolux
INSTALLATION
This operation must be carry on by the
service agent or similarly qualifi ed per-
sons in order to avoid a hazard.
EN
Installation – Air Outlet Version
• The Hood is fi tted with a system that
allows the direction of the air outlet
to be adjusted.
• On installation, the Hood is set up
with the air outlet in the Top position
(fi g.1).
• To modify the position of the air out-
let, remove the Comfort Panel (see
paragraph on Maintenance).
• Remove the Grease Filters (see the
paragraph on Maintenance).
• Remove the profi le after unfastening
the screws that fi x it to the Hood
(fi g.2).
• Remove any Activated Charcoal
Filters (see the paragraph on Mainte-
nance).
• By removing the 6 upper screws,
the 6 rear screws and the 2 screws
on the inside of the Hood, it is pos-
sible to turn the Motor Unit with the
bracket attached so that the air out-
let points to the side (fi g.3).
• To direct the air outlet to one of the
various sides (fi g.4) unfasten from
the inside the screws that fi x the up-
per part containing the motor to the
rest of the Hood.
• Turn the upper part as required, to
the right or left, and then refasten
the screws removed as above from
the inside (fi g.5).
• Replace the profi le, using the
screws removed as above.
• Replace the fi lters.
• Replace the Comfort Panel.
Installation
1
3
4
5
2