Roadstar HIF-8892EBT Bedienungsanleitung Seite 12

7 English
DIRECT USB ENCODING
Remark:
Recording speed is 1:1.

No song title will be recorded during encoding mode.

To avoid damage to USB memory, remove it only when the radio is turned off.

ENCODE FROM FM, TURNTABLE, TAPE, BLUETOOTH AND AUX:
1. Plug the USB stick into the [USB PORT] (3);
2. Perform normal playback of the source you want to encode & record;
3. Press the [RECORD] button (14) to start encoding. The display will show "REC";
4. Once the record is finished, press the [RECORD] button (14) to stop recording.
ENCODE FROM CD:
1. Plug the USB stick into the [USB PORT] (3);
2. Perform normal playback of the CD you want to encode & record;
3. After focus search is completed, press the [RECORD] button (14);
4. Press repeatedly the [SKIP -/+] button (10/11) to select the desired encoding op-
tion:
REC-ONE: Select to record only the current track;

REC-DIRECTORY: Select to record the whole folder;

REC-ALL: Select to record all the tracks of the CD.

5. Press the [RECORD] button (14) to confirm;
6. The playback will stop and restart automatically and on the display "REC" will
flash. Encoding is performing now;
7. Press the [RECORD] button (14) to finish recording.
Note: After completing of encoding, unit will stop playback and encoding automati-
cally.
DELETE TRACKS FROM USB
1. Perform normal playback of the track you want to delete;
2. During playback of the track you want to delete, press and hold [DELETE] (14).
3. Press repeatedly the [SKIP -/+] button (10/11) to select the desired encoding op-
tion:
DEL-ONE: Select to record only the current track;

DEL-DIRECTORY: Select to record the whole folder;

DEL-ALL: Select to record all the tracks of the CD.

4. Press the [DELETE] button (14) to confirm.