Werbung
PROGRAMMING FLOWCHART
Change
ADD
Master
User
Relay 1
Code
Press (from
Enter Memory
01 to 99)
Position from
Enter (000)
for time in
(001 to 999)
seconds
If press 00
toggle mode
Enter new
Enter new code
Master
(1 to 8 digits)
code
OR/AND
03 seconds
(1 to 8
Present Card
digits)
If the user has
both pin and
card then
for access he
must
enter PIN
and present the
Card.
New User will
be assigned
to Relay1
Note: Press B to exit the menu in
any stage of the programming.
EXAMPLES:
ADD PIN Code:
Assign User Code "12345" at Memory Position "5" and Relay 3 that activates for 4 seconds, assuming Master Code = 000.
Press 000B + 0 + 005 + 12345 + A + 3 + 005 + 3 + A + 2 + 04 + A + B.
ADD Card:
Assign an User card at position "6" and Relay 1 that activates for 3 seconds, assuming Master Code = 000.
Press 000B + 0 + 006 + Present Card + A + B.
ADD PIN Code + Card:
Assign User Code "6789" AND Card at Memory Position "7" and Relay 1 that activates for 5 seconds, assuming Master Code = 000.
Press 000B + 0 + 007 + 6789 + Present Card + A + 3 + 007 + 1 + A + 1 + 05 + A + B.
Start
Enter "Master Code" OR "000"(if first time in use)
1 small beep + 1 long beep + Yellow LED is ON
Set
Set
Assign
Relay 2
Output
Timer
Timer
Enter Memory
Press (from
01 to 99)
Position from
for time in
(001 to 999)
seconds
If press 00
toggle
mode
Press(1) for
Default:
Relay 1
Default:
03 seconds
OR/AND
Press(3) for
Relay3
OR/AND
Press(4) for
Relay 4
OR/AND
Press(5) for
Relay 5
OR/AND
Press(6) for
Relay 6
OR/AND
Press(7) for
Relay 7
OR/AND
Press(8) for
Relay 8
OR/AND
Press(9) for
Relay 9
OR/AND
Press(0) for
Relay 10
Press B (Yellow LED is OFF)
Validate by pressing (B)
NO
Validation
OK?
YES
Set
Slave
I/O board
Device
Timer
Press (from
Press(1) for I/O
01 to 99)
board (RB0408)
for time in
OR
seconds
Press(2) for
or press 00
RTT/DINRTT/RU2
toggle
or none
mode
Default:
Default:
03 seconds
RTT/DINRTT/RU2
Press A to validate
Multiple small beeps
NO
Validation
+ Yellow LED blinks
OK?
YES
Two Beeps
END
www.xprgroup.com
Multiple small beeps
+
Yellow LED blinks rapidly
Buzzer
Select
Backlight
Card Type
Read
Press(0) for
Press(0) for
Buzzer OFF
NONE
OR
OR
Press(1) for
Press(1) for EM
Buzzer ON
OR
Press(2) for
Press(2) for
HID
Backlight OFF
OR
Default: EM
Press(3) for
Backlight ON
OR
Press(4) for
backlight on key
press
Press(5) for
dimmed
backlight
Press(6) for
reader's
read range
press(9) for
+1kHz
press(7) for
-1kHz
Default:
Buzzer ON
Default:
Dimmed
Backlight
rapidly
Delete
Delete
All
Single
Users
User
Press
Memory
999
position from
(001 to 999)
7
Werbung
