Introduction - OEG SecuFresh 22 Montage- Und Bedienungsanleitung

16
GB Content
1

Introduction

GB
Introduction
. Intended purpose
. Safety instructions
. Applicable documents
. Delivery and transport
Layout – scope of delivery
Technical data
. General data
. Dimensions / required space
. Pressure loss /
Pump characteristic
. Corrosion protection
. Calcification protection
Assembly
. Wall mounting
. Storage tank installation
with accessories
This manual describes the assembly, operation and maintenance of the SecuFresh
fresh water station.
This manual is intended for trained specialists with an adequate level of expertise in
handling heating systems, water pipe installations and electrical installations.
The installation and commissioning procedures should only be conducted by qualified,
specialist personnel.
The fresh water station must only be installed and operated in dry areas that are
protected from frost.
Read this manual carefully before starting any installation work.
Non-compliance will invalidate all claims under the guarantee and warranty.
Illustrations are symbolic and may differ from product to product.
Subject to technical changes and errors.
This installation and operating manual must not be reproduced or made available to third
parties without prior written consent (section German Copyright Act, section
Code).
. Hydraulic connection
with accessories
. Electrical connection
Start-up
. Leak-testing and filling
the system
. Initial start-up
Operation
. Control unit
. Gravity brake
. Flow switch
Malfunctions /
troubleshooting
Maintenance / service
Decommissioning
Pump information
SecuFresh Fresh water station
Civil