OEG SecuFresh 22 Montage- Und Bedienungsanleitung Seite 17

The SecuFresh fresh water station is used exclusively for heating drinking water using
a buffer storage tank and an internal plate heat exchanger with flow-through principle.
Only drinking water in accordance with the Drinking Water Ordinance must be heated.
In addition to country-specific guidelines and local directives, the following technical
regulations must also be taken into account:
• DIN Technical rules for drinking water installations
• DIN Heating systems and central water heating systems
• DIN Gas, water and wastewater installation works
• DIN Thermal insulation work on thermal engineering systems
• VDI Avoidance of damage in hot water heating systems
• DIN Water heaters and water heating installations for drinking water and
service water
• DIN Central water heating system
• VDE Installation of electrical equipment
• VDE Main equipotential bonding of electrical systems.
• TrinkwV Drinking Water Ordinance
• DVGW W Drinking water heating and drinking water pipeline systems
• BGV Accident prevention regulations of workers' compensation associations
As the system can reach temperatures >
and burning through contact with the components.
Also observe the installation and operating instructions for the components used.
Check to make sure the product is complete and undamaged immediately after reception.
Any damage or complaints must be reported immediately.
SecuFresh Fresh water station
°C, there is a risk of scalding
17
Intended purpose
Safety instructions
Applicable documents
Delivery and transport
GB
1.1
1.2
1.3
1.4