HP q2438b Installationsanleitung Seite 5

When the envelope-size prompt appears on
the control panel display, use the
buttons to select the correct envelope size,
and then press to save the setting.
To verify that installation is complete, print a
configuration page from the control panel.
Press to open the printer menus. Press
to select INFORMATION, and then press
. Press to select PRINT
CONFIGURATION, and then press
If no prompt appears, select the envelope
size from one of these locations, trying them
and
in this order: from the program, the printer
driver, or the PAPER HANDLING menu in
the printer control panel.
hp LaserJet
Make sure that the configuration page lists
the envelope feeder as an installed
accessory. If the feeder is not listed on the
configuration page, see the use guide on the
CD-ROM that came with the printer.
.
4250/4350 series
1
5
To take advantage of all the envelope-
feeder functions, the printer driver on the
printer's host computer must be configured
to recognize the envelope feeder. For
Windows , go to the printer Properties
®
window. On the Device Settings tab, select
the check box for the envelope feeder.
If you cannot resolve the problem, see the
support flyer that came with the printer, or
visit http://www.hp.com. In the Select a
country/region field at the top, select your
country/region and click . Click the
Support block.