Product Overview; Assembly - REV VD 2073 Montage- Und Bedienungsanleitung

Product Overview

Please fold out the last page of these operating instructions
(fold-out diagram of product). Keep the images visible. The
manual refers several times on it.
1= Door intercom
2= Monitor
3= Monitor mains cable
4= Connecting cable
5= Cable connectors
6= Monitor terminal strip
7= Wall fixing
8= Bell push-button

Assembly

Preparation prior to assembly
Before attaching the door intercom and monitor, a suitable spot
must be found (Illus. A / page 61). Then determine the cable
length, which, together with any extension necessary, may not
exceed about 70 metres.
NB: The cabling may not be laid directly alongside mains
cabling. Keep a distance of about 10 cm to avoid interference.
A mains socket (230V~) for the mains cable of the monitor (3)
should be available within reach of the point where the monitor
is to be fitted ( 1m).
15
9= Button » « (Monitor on)
10= Button » « (Monitor off)
11 = Button » « (Door key)
12 = Door ringtone »VOLUME«
13 = »BRIGHTNESS« adjustment
14 = Door opener (not included)
15 = Earphone socket
16 = Status display monitor
17 = Microphone
18 = Camera
19 = Loudspeaker