PRODUCT OVERVIEW
1
Dough hook
2
Upper cover
3
Upper housing
4
Release lever
5
Base unit
6
Switch
COMMISSIONING
1. Unpack the device from its packaging.
2. Remove the transport packaging.
3. Make sure that the device does not show any signs of damage.
4. Place the unit on a level, dry, non-slip surface to prevent the unit from tipping over
or slipping.
5. Check that the speed governor is set to „0".
6. Insert the plug into a suitable socket. The unit is now ready for operation.
7
Suction feet
8
Mixing bowl
9
Beater
10
Balloon whisk
11
Splash guard
EN
13