Technical Data; Lighting; Handling/Transport - OP UNISPEED US-FL/01 MAN Betriebs- Und Wartungsanweisung

OP
S.r.l.
25131 BRESCIA - Via Serpente 97 - Tel.030/3580401 - Fax 030/3580838
_________________________________________________________________________

TECHNICAL DATA

Pre-assembling or flaring range
Maximum power
Dimensions (WxHxD)
Controls
Weight excluding tools
Weight of the BL block
Cylinder bore
Rod diameter
Maximum pistons stroke
Pump delivery
Maximum operating pressure
Max. force on the pump lever

LIGHTING

The equipment does not have its own lighting and so it must be used in suitably illuminated
areas. If perfect visibility is not possible in the working area, authorization to use the
equipment must not be given.

HANDLING/TRANSPORT

CAUTION
The personnel in charge of handling and transport should pay great attention so
that the machine does not suffer any shock or strain which could compromise the
efficiency of the machine and so as not to expose the personnel to risks.
The machine is easy to transport without the need to dismantle any parts, but bthe
precautions which follow mustt be adopted:
 Avoid knocks or sudden shaking during lifting or positioning
 If the machine has to be shipped, make sure that it is securely anchored to the
means of transport and protected against vibrations or crushing.
 The mass of 38 kg does not allow the transfer of the machine by one operator only;
it is therefore advisable to resort to a lifting means with suitable slings.
 During handling be careful not to unbalance the machine, this could result in oil
leackages from the tank or it could overturn.
UNISPEED US/FL 01+ (BL) M
6 - 42 mm
13000 daN (13 ton)
350x390x270
Manual
38 Kg
14 Kg
90 mm
30 mm
35 mm
3,8 cm
210 bar
40 Kg at 210 bar
39
3
E
N
G
L
I
S
H