Yamaha HTR-4065 Bedienungsanleitung Seite 7

5 Optimizing the speaker settings automatically (YPAO)
The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the
distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as
volume balance and acoustic parameters, to suit your room.
• During the measuring process, test tones are output at high volume. Ensure that the test
tones do not frighten small children. Also, refrain from using this function at night when it
may be a nuisance to others.
• During the measuring process, you cannot adjust the volume.
• During the measuring process, keep the room as quiet as possible.
• Do not connect headphones.
• Do not stand between the speakers and the YPAO microphone during the measurement
process (about 3 minutes).
• Move to the corner of the room or leave the room.
Preparing for YPAO
Turn on the subwoofer and set
the volume to half. If the
crossover frequency is
adjustable, set it to maximum.
CROSSOVER/
VOLUME HIGH CUT
MIN MAX MIN MAX
6
En
The unit (front)
YPAO microphone
Listening position
Ear height
Place the YPAO microphone at your
listening position (same height as your
ears). We recommend the use of a
tripod as a microphone stand. You can
use the tripod screws to fix the
microphone in place.
1
CODE SET CODE SET
SOURCE SOURCE RECEIVER RECEIVER
HDMI HDMI
1 1 2 2 3 3 4 4
AV AV
1 1 2 2 3 3 4 4
5 5 6 6 AUDIO AUDIO A A
V-AUX V-AUX USB USB NET NET B B
ZONE ZONE
TUNER TUNER
FM FM AM AM
PRESET PRESET TUNING TUNING
INFO INFO MEMORY MEMORY
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER DIRECT DIRECT
SLEEP SLEEP
SCENE SCENE
SETUP
BD BD
TV TV NET NET RADIO RADIO
DVD DVD
SETUP OPTION OPTION
2
Cursor keys
ENTER VOLUME VOLUME
ENTER
RETURN RETURN
DISPLAY DISPLAY
TOP TOP
POP-UP POP-UP
MUTE MUTE
MENU MENU MENU MENU
MODE MODE
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
9 9 0 0 10 10 ENT ENT
TV TV
INPUT INPUT
TV VOL TV VOL TV CH TV CH
MUTE MUTE
Connect the YPAO microphone to the
YPAO MIC jack on the front panel.
The following screen appears.
A u t o S e t u p
S t a r t P r e s s S E T U P k e y
t o S t a r t
E x i t
P o w e r A m p A s s i g n
B a s i c
VOL.
[SETUP]:Start
• To cancel the operation, disconnect the YPAO microphone, or
use the cursor keys to select "Exit" and press ENTER, before
starting the measurement.
To start the measurement, press SETUP.
The measurement will start in 10 seconds.
The following screen appears on the TV when
the measurement finishes.
A u t o S e t u p
M e a s u r e m e n t
F i n i s h e d
S t a r t
Result
E x i t
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB
VOL.
Finished
SW
C
L R
SL SR
SW
C
L R
SL SR