Technical Data - S+S REGELTECHNIK Thermasreg ALTR series Bedienungs- Und Montageanleitung

G
THERMASREG ® ALTR 060 ⁄ ALTR 090
Mechanical temperature controllers ⁄ contact thermostats THERMASREG
ler) for monitoring, controlling and limitation of temperatures at pipes or vessels, e.g. in connection with hot-water or floor heating
systems. The contact temperature controller THERMASREG
controller TR (with external setting) or as adjustable temperature monitor TW (with internal setting).

TECHNICAL DATA:

Switching capacity: .................... 16 (4) A; 24...250 V AC
(Contact load)
Contact: ....................................... dustproof switch block unit as
Max. sensor temperature: ....... 110 °C
Enclosure: .................................... ABS (acrylonitrile butadiene styrene),
Enclosure temperatur: .............. - 35 °C ...+ 65 °C
Tolerance: .................................... T
Sensor element: ......................... bimetal
Dimensions: ................................. 38 x 48 x 103 mm
Process connection: .................. by metal tension spring, 220 mm long
Electrical connection: ................ 0.14 - 1.5 mm
Protection class: ........................ I (according to EN 60 730)
Protection type:.......................... IP 40 (according to EN 60 529)
Standards: ................................... CE conformity,
FUNCTION:
Heating: ........................................ wire contacts C - 1
Cooling:......................................... wire contacts C - 2
Type ⁄ WG2
ALTR - 060
0 °C ...+ 60 °C
ALTR - 060 U
0 °C ...+ 60 °C
ALTR - 090 + 20 °C ...+ 90 °C
ALTR - 090 U + 20 °C ...+ 90 °C
at 24 V AC min. 150 mA
potential-free single-pole changeover contact
fibre-glass reinforced,
base: steel, galvanised, top: grey,
M 16 x 1.5
± 5 K; T ± 5 K
min max
(included in the scope of delivery)
2 via terminal screws
EMC directive 2004 ⁄ 108 ⁄ EC,
low-voltage directive 2006 ⁄ 95 ⁄ EC
Temperature Thermal Operating
Range Difference (fixed) ca.
8 ± 1 K
8 ± 1 K
8 ± 1 K
8 ± 1 K
® ALTR 060 ⁄ 090 with switching output (two-position control-
®
ALTR 060 ⁄ 090 is built as one-step device, as adjustable temperature
Max. Capillary
Temperature
+110 °C
+110 °C
+110 °C
+110 °C
Connecting diagram
C 2 1
Features
External setting, TR
Internal setting, TW
External setting, TR
Internal setting, TW
ALTR 060
ALTR 090