Philips hd 3600 Bedienungsanleitung Seite 23

Problem
The display shows the wrong volume.
The appliance doesn't chill the beer sufficiently.
The appliance makes a sound.
Solution
Make sure you keep the appliance plugged in all the time.
Once the keg has been opened and is kept cool, the beer
stays fresh for 28 days. Check the sell-by date on the keg
before installing a new keg.
In case of a power failure or if the appliance has been
disconnected from the mains, the level indication will be
accurate again after you have poured 1 or 2 glasses of beer.
Remove the plug from the wall socket, wait 5 seconds and
then reinsert it.
Pour 1 glass of beer (of at least 250ml) while opening the
tap handle quickly and completely (to prevent the
development of foam).
Make sure the temperature inside the appliance is 4cC or
below by placing the appliance in an environment with an
ambient temperature between 3cC and 30cC and leaving
at least 10 cm free space behind and on both sides of the
appliance.
Make sure that there is at least 10 cm free space behind
and on both sides of the appliance for the best
performance.
Make sure that the appliance is used at an ambient
temperature between 3cC and 25cC. Do not expose the
appliance to direct sunlight.
Make sure the keg does not have a temperature of more
than 23cC when you place it into the appliance. If the keg
has a temperature of more than 23cC, a longer chilling
time will be required.
Check if the fan outlet at the back of the appliance is free
from dust and/or other particles.
The pump may go on while you are pouring beer in order
to maintain the right pressure.The pump also goes on
every now and then to keep the appliance at the right
pressure.
ENGLISH
23