Philips hd 3600 Bedienungsanleitung Seite 17

C
6 Press the blue release button to release the tube.
C
7 Pull the tube connector out of the tap unit and remove the
flexible tube out of the tap body.
Note: always clean the tap unit with hot water and, if necessary, some
washing-up liquid before inserting a new tube.
8 Assemble the tap unit onto the keg (see chapter 'Preparing for
use', 'Step 2: placing the tap unit onto the keg').
9 Insert a new tube into the tap unit (see chapter 'Preparing for
use', 'Step 3: placing the tube into the tap unit').
10 Place the new keg into the appliance (see chapter 'Preparing
Cleaning
for use', 'Step 4: placing the keg into the appliance').
Clean the appliance when you replace the keg or when you are going
to store the appliance for a longer period.
Never use scouring pads and abrasive liquids such as scouring agents
petrol or acetone to clean the appliance.
1 Always unplug the appliance before cleaning it.
2 Clean the outside of the appliance with a damp cloth.
C
3 Remove the spout.
C
4 Remove and disassemble the drip tray and the drip tray cover.
ENGLISH
17