Philips hd 3600 Bedienungsanleitung Seite 16

ENGLISH
16
Replacing the keg
When the keg is empty, only foam will come out of the spout and no
beer.The display will indicate that the keg is empty.This means that you
have to replace the keg.
C
1 Open the doors by pressing the release button.
Make sure you open the doors fully.
C
2 Lift the blue locking levers completely.
C
3 Tilt the keg with the assembled tap unit towards you and take
it out of the appliance.
C
4 Remove the tap unit from the keg by pressing the release
buttons on both sides of the tap unit (1).The tap unit will be
released from the keg with a click and you can remove it (2).
You have to remove the tap unit from the keg before you can replace
the tube.The release button for releasing the tube will not work when
the tap unit is placed on the keg.
C
5 Hold the tap unit over a sink.