Operating Elements And Connections; Safety Notes - IMG STAGELINE MPX-622 Bedienungsanleitung

Please unfold page 3. Then you can always see the
operating elements and connections described.

1 Operating Elements and Connections

1.1 Front panel
1 Bass control (BASS) and treble control (TREBLE)
for the microphone channels MIC 1 and MIC 2
2 Volume controls (faders) for the input channels
CH 1-CH 4
3 Input selector switches for the channels CH 1 – CH 4:
CH 1: PHONO/LINE
CH 2: PHONO/LINE
CH 3: LINE/CD
CD 4: CD/TAPE
4 Talkover switch for microphone announcements: in
TALK position the level of channels CH 1-CH 4
are attenuated by 15 dB.
5 Stereo VU meter for the output AMP (19)
6 Monitoring buttons to monitor the input channels
CH 1-CH 4 and the output channel via head-
phones connected to jack PHONES (16)
7 POWER switch
8 POWER LED
1
9 / " input jacks MIC 1 and MIC 2 to connect mono
4
microphones
10 VOLUME controls for both microphone channels
11 CROSSFADER for fading between two of the
channels CH 1-CH 4; the respective channels are
selected with both ASSIGN switches (12)
12 Selector switches ASSIGN to select two of the
channels for fading
ASSIGN A: position 1, 2 or 3 to select the chan-
nels CH 1, CH 2 or CH 3
ASSIGN B: position 2, 3 or 4 to select the chan-
nels CH 2, CH 3 or CH 4
If the respective switch is in "0" position, no chan-
nel is selected.
13 Fader for the output AMP (19)
14 3-way equalizer for the outputs; consisting of the
controls HIGH, MID and LOW
15 VOLUME control for the headphones connected to
jack PHONES (16)
1
16 / " PHONES jack to connect stereo headphones
4
(impedance ≥ 8 Ω)
1.2 Rear panel
17 Mains cable for the connection to 230 V~ / 50 Hz
18 Phono output jacks REC to connect an audio re-
cording unit; the recording level is independent of
the position of the MASTER fader (13)
19 Phono output AMP to connect an amplifier
20 Phono input jacks TAPE, CD and LINE for the
channels CH 1-CH 4 to connect units with line
level (e. g. tuner, CD player, cassette recorder)
21 Phono input jacks PHONO for the channels CH 1
and CH 2 to connect record players with magnetic
system
22 Connection for the common grounding point, e. g.
for record players

2 Safety Notes

This unit corresponds to the directive for electromag-
netic compatibility 89/336/EEC and the low voltage
directive 73/23/EEC.
Attention!
The unit is supplied with hazardous mains voltage
(230 V~). Leave servicing to skilled personnel only.
Inexpert handling may cause an electric shock
hazard. Furthermore, any guarantee claim will expire
if the unit has been opened.
Please observe the following items in any case:
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity, and heat (admissible ambient temperature
range 0 – 40 °C).
Do not place any vessels filled with liquid, e. g. drink-
ing glasses, on the unit.
Do not take the unit into operation and immediately
take the mains plug out of the mains socket if:
1. damage at the unit or mains cable can be seen,
2. a defect might have occurred after a drop or simi-
lar accident,
3. there are malfunctions.
The unit must in any case be repaired by author-
ized skilled personnel.
A damaged mains cable must only be repaired by
the manufacturer or authorized skilled personnel.
Never pull the mains plug out of the mains socket by
means of the mains cable.
If the unit is used for purposes other than originally
intended, if it is operated in the wrong way or not
repaired by authorized skilled personnel, there is no
liability for possible damage.
Use a dry dust cloth only for cleaning, by no means
chemicals or water.
If the unit is to be put out of operation definitively,
take it to a local recycling plant for disposal.
Important for U.K. Customers!
The wires in this mains lead are coloured in accord-
ance with the following code:
blue = neutral; brown = live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug, pro-
ceed as follows:
1. The wire which is coloured blue must be con-
nected to the terminal in the plug which is
marked with the letter N or coloured black.
2. The wire which is coloured brown must be
connected to the terminal which is marked with
the letter L or coloured red.
3 Applications
The 6-channel stereo mixer with four stereo input
channels and two mono microphone channels is suit-
able for any desired DJ applications for professional or
private use as well as for PA system applications.
The mixer can be used as a table top unit or be
installed into a 19" rack. For the rack installation two
rack spaces = 89 mm are necessary.
GB
7