Levenhuk Energy PLUS Serie Bedienungsanleitung Seite 5

Care and maintenance
Do not touch the optical surfaces with your fingers. You can use a soft
napkin or a cleaning wipe, dipped in ether or absolute alcohol, to
clean lenses. We recommend using special optics cleaning fluids from
Levenhuk.
Abrasive particles, such as sand, should not be wiped off lenses, but
instead blown off or brushed away with a soft brush.
Do not apply excessive pressure when adjusting focus, diopters or
interpupillary distance.
Protect your binoculars from sudden impacts and excessive
mechanical force. This instrument may be used in high humidity
(during rain, snowfall, etc.).
Store your binoculars in a dry, cool place away from hazardous acids
and other chemicals, away from heaters, open fire and other sources
of high temperatures. Do not use your binoculars for lengthy periods
of time, or leave them unattended in direct sunlight. Always store
them in a special case.
We recommend keeping the silicate gel packet, included in the kit.
During long storage, a thin white film may appear on the rubber
armor. You can wipe it clean with a clean napkin.
When bringing your binoculars inside from the cold – or during any
drastic change of temperature, for that matter – put them in a case
and allow them to adapt to the temperature of the environment. This
prevents lenses from fogging.
International Warranty
The Vendor guarantees that the quality of the Levenhuk product
purchased complies with the technical documentation requirements
on conditions that the consumer observes rules of transportation,
storage conditions and operating instructions.