Memory System; Lcd Backlight And Laser Pointer - Gross Kompakt 70 Betriebsanleitung

4. MEASUREMENT BY A SPECIFIED MARK
You can set the necessary distance to accelerate the measuring
process. Set a distance to the specified mark; if you use dynamic
measuring you will here an audio signal.
Setting:
• Press three times to adjust the specified distance.
• Press to increase the value.
• Press to decrease the value.
• Press to shift between number rates.
• When the value is chosen press
• To clear to zero, press
Measurement by specified distance:
In dynamic measuring mode arrows will be appearing to the left
of the number. Following this arrow, set the necessary distance.
When approaching to the chosen distance, you will hear an audio
signal.
22
to finish setting.
.

MEMORY SYSTEM

Distance meter is provided with the feature of extracting data
from its memory.
• Holding , you will be able to see the latest 20 measure-
ment results on the screen.
• To look through records at the beginning of the list press
• To look through records at the end of the list press

LCD BACKLIGHT AND LASER POINTER

• For switching screen backlight on and off, press
• Hold to turn laser pointer on. Laser icon will be active
all the time.
Constant
indication show
that laser
pointer is active
.
.
.