1. Carry case, 1pc;
3. Batteries AAA, 2pcs;
5. Pencil, 1pc;
1
TURNING ON THE DEVICE
•
Prior to turning the device on make sure batteries are
installed properly. For installing method please refer to page 13.
•
Press button
•
If the device is operational, initial screen will flash several
seconds for checking status.
•
After checking, stand-by screen will be displayed.
18
CONTENTS
2. Distance meter, 1pc;
4. Belt, 1pc;
6. User manual, 1pc.
3
6
2
4
to turn the distance meter on.
DISTANCE MEASUREMENT
WARNING!
Laser activates automatically when you turn the distance meter
on. Look at the icon in the upper-left corner of the screen
to check laser operating mode.
•
If laser is not activated, press
•
Then aim the laser at the target and keep it in that position.
•
Press
•
When measurement is finished, you will hear an audio signal
or see measurement result on the screen.
•
Laser will switch off after measurement is done.
5
Laser activated
to turn it on.
to do the measurement.
Laser switched o
Measurement
complete