ADDING FUNCTION
Calculation of measurements sum is performed simply with
several buttons.
•
Once you make the first measurement, press
the result into device's memory (temporary saving).
•
Measure the next distance.
•
Press
.
•
The result will be shown on the main screen.
SUBTRACTION FUNCTION
Calculation of measurements difference is performed simply
with several buttons.
•
Once you make the first measurement, press
result into device's memory (temporary saving).
•
Measure the next distance.
•
Press
.
WARNING!
Be sure to add and subtract in same unit.
DYNAMIC (CONTINUOUS) MEASUREMENT
•
Hold button
measurement. The device will switch to dynamic measuring
to save
mode.
•
Upon switching to dynamic measuring mode, laser beam will
also be activated.
•
For pause press
•
Maximum and minimum values will be displayed on the screen.
•
For quitting dynamic measuring mode and returning back to
standard mode please press
to save the
For making measurement after specified time.
•
Press
to set the necessary delay. Changing time intervals
is carried out through the same button.
•
Timer clock can be set between 3 and 15 seconds.
•
After time is set, press
•
After an audio signal the result of measurement will be
displayed on the screen.
to activate dynamic (continuous)
or
.
.
TIMER CLOCK
to do the measuring.
19