Set Up Main Unit; Weather Information Display; Regional Weather Information - Oregon Scientific WMH90 Bedienungsanleitung

The remote sensor reception icon will show the following
status:
ICON
The main unit will search only for already
registered sensor or new sensor reset within last 30
minutes. To register a new sensor, reset sensor prior
to search.
TIP The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.

SET UP MAIN UNIT

Set up the remote sensor before installing the
main unit.
1. Remove the battery compartment cover.
2. Insert the batteries, matching the polarities.
3. Press RESET after each battery change.
DESCRIPTION
Main unit is
searching for
sensor(s).
A channel has
been found.
The sensor
cannot be found.
5
Batteries should not be exposed to excessive
heat such as sunshine or fire.

WEATHER INFORMATION DISPLAY

REGIONAL WEATHER INFORMATION

This unit displays the current and next 3-day weather
information of a user-selected regional city.
strong signal reception of weather information.
ICON LOCATION
Clock / Alarm /
Calendar /
Message area
Today's Weather /
Regional Weather
area
Clock / Alarm /
Calendar /
Message area
Today's Weather /
Regional Weather
area
Clock / Alarm /
Calendar /
Message area
Today's Weather /
Regional Weather
(blinking)
area
indicates
DESCRIPTION
Some cities' data
are received
Past 2 days' data
of the selected city
Most cities' data
are received
Yesterday's data of
the selected city
During signal
testing, no signal
synchronized
Past 2 days' data
of the selected city,
with message