To Activate / Deactivate Alarm; To Silence Alarm; Display Contrast; Backlight - Oregon Scientific WMH90 Bedienungsanleitung

3. Press / to set hour and minute.
4. Press ALARM to confirm.
5. Press MODE to return to clock display.

TO ACTIVATE / DEACTIVATE ALARM

1. Press ALARM to enter Alarm mode.
in Alarm mode.
2. Press ALARM repeatedly to activate or deactivate
alarm. indicates alarm is On.
3. Press MODE to confirm and return to clock display.

TO SILENCE ALARM

• Press SNOOZE / LIGHT to snooze alarm for 8
minutes.
OR
• Press any key to turn the alarm off and activate it
again after 24 hours.

DISPLAY CONTRAST

You can adjust the clarity level of the display. Press and
hold MODE until "CONTR" is shown, then select from
0 (lowest) to 15 (highest) by pressing
your preferred level of display contrast. Press MODE
to confirm.

BACKLIGHT

Press SNOOZE / LIGHT to activate LED backlight for
8 seconds.

RESET

Press RESET to return to the default settings.
indicates

SPECIFICATIONS

MAIN UNIT

Dimensions (L x W x H)
Weight
Temperature range
Temperature resolution
Humidity range
Humidity resolution
Power

REMOTE THERMO SENSOR (THN132N)

L x W x H
/ for
Weight
8
95 x 48 x 165 mm
(3.7 x 1.9 x 6.5 in)
240 g (8.47 oz)
without battery
-5°C to 50°C (23°F to 122°F)
0.1°C (0.2°F)
25% to 90%
1%
3 x UM-3 (AA) 1.5V batteries
96 x 50 x 22 mm
(3.78 x 1.97 x 0.87 in)
50 g (1.76 oz)
without battery