Further Information; More Information; Eu Conformity - DENIOS. SpillGuard Kurzanleitung

5.4 False alarm
Under certain climatic conditions conden-
sation can form on the sensor surface. This
can trigger a false alarm.
Push the button (< 10 s) to turn off the
1.
alarm.
Clean the sensor surface with a soft,
2.
lint-free cloth.
Calibrate SpillGuard® (see section 5.2).
3.

6. Further information

Further information on alarms, decommis-
sioning and disposal for example can be found
in the operating instructions. The operating
instructions can be found here:
www.denios.com/spillguard

7. EU conformity

SpillGuard® is certified in accordance with
directive 2014/34/EU (ATEX directive).
Production is monitored by regular and
independent inspections for continuous
compliance with legal and normative
requirements.
This declaration of conformity as well as
confirmation of conformity with directives:
2014/30/EU (EMV)
W
2011/65/EU (RoHS 2)
W
EG 1907/2006 (REACH)
W
can be found at the following address:
www.denios.com/spillguard
SpillGuard® Quick Guide | 269803 | Rev. 0
19/40