Installation - krispol STARCUS series Montageanleitung

The mounting location should be kept clean and should be tidied up after installation. The future users should be trained.
The control element, which activates the support function (the function requires constant pressing of the control element by
the operator) should be located in a place where the driven part is directly seen but away from moving parts. The installation height of
the control element should be at least 1.5 m and be convenient for maintenance. The fixing point should be inaccessible to the public.
Before starting the installation of the drive, make sure that there are no entrapment areas between the door and its fixed parts
during opening.
1.10
1.4 1.4
1.4 M6 M6
M6 M6
1.8 1.6
1.6
Gb 6,3x16 Gb 6,3x1 6
1.12*
1.12
1.16
1.15
1.19
* - option
1.1 1.1
1.1
ST6,3x22 ST6,3x22
1.5*
1.9 1.7
1.13 1.9
1.9
1.17 1.13
1.20 1.16
1.16
1.2
1.2
1.6*
1.10 1.8
1.8
M6x16 M6x16
M6 M6
M6 M6
1.14*
1.10*
M8x16
M8
1.18
1.14
1.17 1.17 1.21
1.17

6.4. Installation

1.3 1.3
1.3
1.7 1.5
1.5
Ø4,5mm Ø4,5mm
1.11*
1.15 1.11
1.11
1.22 1.18
31
EN