Wiseup PBC100 Benutzerhandbuch Seite 4

5.6. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Power off the camera and connect it to an outlet AC power supply using the USB
cable and your DC 5V 1A phone charger.
6.2. The red indicator light will stay illuminatedwhile the blue one will keep flashing during
the charging process.
6.3. It will take 12 hours to obtain a full charge.
6.4. When the camera is fully charged, both red and blue indicator lights will stay
illuminated.
VII. Resetting
If for any reason, the camera stops responding or isn't working properly, a quick reset will
restore it back to normal operation.
Operation: When the camera is powered on, use a pin to press the Reset Button once
and the camera will shut down automatically. Then you can restart the camera to the
factory default settings.