Wiseup PBC100 Benutzerhandbuch Seite 3

2). The camera can record video for 8 hours continuously on a full charge.
3). Video Resolution: 1280×720P Video Format: AVI
4). The camera will shut down automatically and save all video files if it is in low battery. Both red
and blue indicator lights will flash twice and turn off.
3.3. MOTION DETECTION RECORDING
3.3.1. Power on the camera by pressing the Power Button for 2 seconds. The red indicator
light will come on and stay illuminated, indicating the camera has entered into standby mode
automatically.
3.3.2. Press the Motion Detection Recording Button for 2 seconds to make the camera enter
into motion detection recording mode. The blue indicator light will flash twice and then turn off.
The camera will capture a 10 minutes' video automatically when a movement is detected.
3.3.3. Press the Motion Detection Recording Button once to exit motion detection
recording mode. The red indicator light will come on and stay illuminated, indicating the
camera is back to standby mode.
IV. Video/Image File Uploads
4.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
4.2. Insert the card reader into a proper PC computer USB port.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the drive.
V. Setting Time/Date Stamp
5.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
5.2. Insert the card reader into a proper PC computer USB port.
5.3. Removable disk drive folder appears.
5.4. Click on the drive in the root directoryand inside the root directory, create a file named
"time.txt".
5.5. Write the current date and time in the "time.txt" file with the correct format:
YYYY.MM.DD HH:MM:SS (For example: 2016.04.12 14:24:32). If you don't need the time
and date stamp on the video footage, you can add an "N" in the "time.txt" file. (For
example: 2016.04.12 14:24:32 N). Save this file.