Sanus CFR1615 Handbuch Seite 22

5
Start upper lag bolts [14], hang frame assembly
on bolts [14], then slip "U" washers [11] onto
the upper bolts [14]. Lower bolts [14] use round
washers [12].
[14]
Tighten lag bolts [14] only until the washers [11]
[11]
and [12] are pulled fi rmly against the brace [03].
CAUTION:
Improper use could reduce the
holding power of the lag bolt. To avoid potential
injuries or property damage DO NOT over-
tighten the lag bolts [14].
13mm
(1/2 in.
)
[12]
[14]
[12]
[14]
[14]
[11]
22