Inhaltsverzeichnis
Werbung
3
Level frame assembly and mark top hole locations.
Drill pilot holes as illustrated.
4
CAUTION:
holding power of the lag bolt. To avoid potential
injuries or property damage: pilot holes MUST
be drilled to a depth of 89 mm (3.5 in.), using a
5.5 mm (7/32 in.) diameter drill bit.
Start top lag bolts [14]. Leave
5
approximately 13 mm (1/2 in.) of
space from the bolt head to the wall.
13 mm
(1/2 in.)
13mm
(1/2 in.
)
Improper use could reduce the
5.5 mm
(7/32 in.)
[14]
17
Werbung
Inhaltsverzeichnis
