Sanus CFR1615 Handbuch Seite 14

Single Wall Mounting (solid concrete and concrete block)
1 Level frame assembly and mark hole locations.
14
Drill pilot holes as illustrated.
2
CAUTION:
To avoid potential injuries or
property damage:
 Pilot holes MUST be drilled to a depth of 89 mm
(3½ in.) using a 10 mm (3/8 in.) diameter drill bit.
 Never drill into the mortar between blocks.
 Minimum solid concrete thickness: 8 in.
 Minimum concrete block size: 8 x 8 x 16 in.
(3½ in.)
10 mm
(3/8 in.)
89 mm