Sanus CFR1615 Handbuch Seite 12

Single Wall Mounting (wood stud)
Locate studs. Verify the center of the stud with an
1
awl or thin nail or use an edge to edge stud fi nder.
CAUTION:
and property damage!
 Any material covering the wall must not
exceed 16 mm (5/8 in.).
 Minimum wood stud size: common 2 x 4 in
(nominal 1½ x 3½ in).
12
Avoid potential personal injuries
41 cm
(16 in.)
2
Level frame assembly and mark hole locations.