dirna Bergstrom bycool green line INTEGRAL POWER Montageanweisungen Seite 18

INTEGRAL POWER
EN
CABIN EXTERIOR:
5
Position the Integral Power unit in the hatch
gap.
Position the unit in the truck.
6
CABIN INTERIOR:
7
Screw (4) 8/125x100-70 or 120 studs
around 5 mm; the size will be chosen after
positioning the attachment supports and
bearing in mind that the studs must protrude
by about 20 mm from the bottom.
Position (1) Ø7 rubber washer, (1) Ø8 flat wide-
8
rimmed washer, (2) M8 nut and (1) Ø8 flat
wide-rimmed washer on each of these studs, in
the same order.
6
7
Base
Ø8 Flat
Rubber
wide-rimmed
washer washer
8
18
Air conditioning for vehicles
5 mm
Stud
Support piece
20 mm
M8 nut
5
Ø8 Flat
wide-rimmed
washer