Maintenance; Dismantling And Disposal - Motostar MP100 Gebrauchs- Und Wartungsanleitung

MAINTENANCE

WARNING! When cleaning, maintaining and replacing parts,
disconnect the operator from the mains power supply.
At least every six months, perform ordinary maintenance jobs.
A - Wipe clean the photocells' glass with a soft, slightly water-
dampened cloth. Do not use any solvents or other chemicals.
B - Check that the photocells are working properly by waving an
object between them when the gate is moving: if the maneuver
stops or inverts, then the photocells are working properly. Do
this procedure outside of the gate's operating area.

DISMANTLING AND DISPOSAL

DISPOSE OF RESPONSIBLY! Before disposing, it is always
advisable to check with the specific laws that apply in your area.
DISPOSING OF THE PACKAGING
The packaging materials (cardboard, plastic, and so on) should
be disposed of as solid urban waste, and simply separated from
other waste for recycling.
Always make sure you comply with local laws before dismantling
and disposing of the product.
DISMANTLING AND DISPOSAL
Our products are made of various materials. Most of these
REFERENCE REGULATIONS
LABEL HABITAT SAS declares that this product complies with the reference directives in effect at the time it was made.
(excluding point B)
C - Check that there are no impediments to the proper operation
of the operator, such as any overgrown vegetation that could
block the photocells or any changes or yielding to the gate's
structure.
Only have qualified, expert staff perform any repairs or
changes to the system. Always keep a log of such jobs.
(aluminum, plastic, iron, electrical cables) is classified as solid
urban waste. They can be recycled by separating them before
dumping at authorized city plants.
Other components such as control boards, radio control
batteries, and so on, may contain pollutants. These must
therefore be disposed of by authorized, certified professional
services.