Ingersoll-Rand 3128XPA Technische Produktdaten Seite 5

See drawing 16591836 on page no. 2.
A Sanding Pad
B Backing Pad
Hook and Loop Sanding Paper Installation:
1. Use wrench to hold spindle in place.
2. Thread backing pad onto spindle.
3. Center sanding paper and attach onto backing pad.
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
47520883001_ed3
EN
EN-2