Philips sonicare elite e7000 Serie Bedienungsanleitung Seite 12

ENGLISH
12
C
The luxury brush holder can be mounted to the wall with
2 screws (3.0 x 30 mm) and 2 wall plugs (not included)
Cleaning
Simple tips for care
By following these simple steps, you should get years of worry-free
brushing:
C
1 Rinse the brush head and bristles after each use.
C
2 Clean the brush head weekly, including under the nut.
3 To remove the nut:
C
Press down gently on the grey seal area.
Avoid using sharp objects to push on the seal as this may cause
damage.
C
Push the nut up over the end of the brush head.
4 To reassemble the nut, slip the nut over the brush head shaft
and insert the lower part of the brush head into the handle.
Turn the nut clockwise until it is firmly tightened and the nut
snaps into the seal.