Using Bigz Pro, Bigz Xl, Bigz Or Originals With Crease Rule; Using Framelits Or Wafer-Thin Dies - SIZZIX Big Shot PRO Anleitung

Extended Sliding Tray
Using all Sizzix Bigz
with Crease Rule*
1. Place a die on a Cutting Pad with foam side up. Place paper or desired material
to be cut on top of the die. Place the Premium Crease Pad (Sold Separately) on
top of the paper or material to create a "sandwich" (Figure C). *A Mylar Shim
may be necessary; see Troubleshooting Solutions on page 13.*
2. Place sandwich on top of the Adapter Pad in the Sliding Tray.
3. Follow Steps 3–5 in Operating Instructions, page 6.
Extended Sliding Tray
Using Framelits
1. Place material to be cut on top of a Cutting Pad. Align die on top of material
as desired. Place Cutting Pad on top of die to create a "sandwich" (Figure D).
2. Place sandwich on Big Shot™ Pro Solo Platform, Solo Shim and Solo Thin-Die
Adapter (all sold separately) and place on top of the Adapter Pad in the
Sliding Tray.
3. Follow Steps 3–5 in Operating Instructions, page 6.
"Sandwich"
Figure C
™ Pro, Bigz XL, Bigz or Originals
"Sandwich"
Figure D
™ or Wafter-Thin Dies
7
Premium Crease Pad
Material
Bigz Pro Die
Mylar Shim
Extended Cutting Pad
Extended Adapter Pad
™ Dies
Extended Cutting Pad
Die
Paper
Extended Cutting Pad
Solo Thin-
Die Adapter
Solo Shim
Solo Platform
Extended Adapter Pad