Axis Q3505–SVE Installationsanleitung Seite 19

Adjust Camera Angle
1. Lines on optic holder that indicate an increment in the tilt angle by 10°
2.
Small lines on optic mount that indicate a pan increment of 3°
3.
Lines on optic mount that indicate a pan increment of 15°
4.
Lines on lens cover to help ensure camera is level
1. Pan, tilt and rotate the camera to cover the area under surveillance. It is possible to pan
360°, and tilt to an angle of 90°.
2. Pan and rotate the lens to adjust image. Use the 2 lines on the lens cover to ensure
the camera is level. Use the function button to activate levelling aid. See Function
Button on page 13.
Attach Dome Cover
1. Attach the view protection to the camera unit.
2. Make sure the gasket in the dome cover is clean and sits securely in place.
3. Place the dome cover on the unit casing and tighten the screws to 1.5 Nm (1.1 lb ft) with
the supplied nut setter.
4. Remove the protective film from the dome cover.
Access the Product
AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis products
on the network and assigning them IP addresses in Windows®. Both applications are free and can
be downloaded from www.axis.com/techsup
The product can be used with most operating systems and browsers. The recommended browsers are
• Internet Explorer
®
• Safari with OS X
AXIS Q3505–SVE Network Camera
4
1
® ®
with Windows
®
and
19
2
3